FW2010e-1

Product Description

Check out our data plans here!

The Inseego Wavemaker FW2010e-1 is a professional-grade outdoor 5G CPE (Customer Premises Equipment) built for fixed wireless access deployments where reliability, speed, and weather resistance are non-negotiable. Engineered for exterior mounting on rooftops, walls, and poles, it delivers gigabit-class 5G connectivity via a single high-speed Ethernet handoff to your indoor network — no wired infrastructure required, no trenching, no ISP installation lead time. With dual Nano SIM slots, IP67 weatherproofing, support for both sub-6 GHz and mmWave 5G bands, and Verizon and UScellular certification, the FW2010e-1 is the right tool for ISPs, WISPs, enterprise IT teams, and managed service providers deploying scalable fixed wireless access at permanent and semi-permanent locations. Activate it with ISPTek’s cellular SIM card data plans for fully managed, business-grade connectivity from day one.

What It Does & Key Features:

• Professional Outdoor 5G CPE: Designed for exterior mounting — rooftop, pole, or wall bracket — with IP67 dust and waterproof protection rated for all-weather, year-round operation in temperatures from -20°C to 60°C.
• Sub-6 GHz and mmWave 5G: Supports n77 C-Band, n2, n5, and n66 for wide-coverage sub-6 5G performance, plus n260 (28 GHz) and n261 (39 GHz) mmWave for gigabit-class throughput in dense urban and carrier edge environments.
• Dual 4FF Nano SIM Slots: Two user-accessible Nano SIM slots enable carrier redundancy, SIM management flexibility, and seamless connectivity across Verizon and UScellular networks from a single unit.
• Single 5 Gbps PoE Ethernet Port: Connects directly to an indoor router or PoE-capable switch via a single cable — the same cable delivers both power and data, eliminating the need for a separate power supply at the mount point.
• 4×4 MIMO Cellular Radio: 4×4 MIMO on LTE and sub-6 5G bands for maximum signal throughput, diversity gain, and stable performance in challenging RF environments including obstructed sightlines and high-noise areas.
• LTE Cat 22 Fallback: Advanced LTE Category 22 support ensures high-performance LTE connectivity on Band 2, 4, 5, 13, 48 (CBRS), and 66 wherever 5G coverage is unavailable or signal conditions favor LTE.
• Enterprise Security & VPN: Supports IPsec VPN, OpenVPN, IPv4/IPv6 dual-stack, and APN-level access control — ready for enterprise network integration, remote management, and carrier-grade security policy enforcement.
• GPS Built-In: Integrated GPS enables asset tracking, site registration, and location-aware network management for deployments across large or distributed footprints.

Works on Verizon & UScellular Networks:

The Inseego Wavemaker FW2010e-1 is certified for use on Verizon’s and UScellular’s networks and covers the full range of 5G and LTE frequencies deployed across the United States — from dense urban mmWave zones to rural LTE-only coverage areas.

• n77 C-Band & Sub-6 5G (n2, n5, n66): n77 C-Band is the core of Verizon’s nationwide 5G build-out — delivering consistent mid-band 5G speeds across suburban and urban markets. n2, n5, and n66 extend 5G reach into rural and mid-density coverage zones where C-Band is not yet deployed.
• mmWave 5G (n260, n261): 28 GHz and 39 GHz mmWave bands deliver gigabit-class fixed wireless speeds in dense urban deployments and carrier edge locations where Verizon mmWave infrastructure is active — ideal for high-throughput FWA in apartments, MDUs, and campus buildings.
• LTE Bands B2, B4, B5, B13, B48, B66: Comprehensive LTE coverage including Band 13 (Verizon’s primary LTE anchor), CBRS Band 48 for enterprise and neutral-host deployments, and AWS bands B4 and B66 for capacity in dense areas. Ensures full fallback coverage wherever 5G isn’t available.
• UScellular Certified: Confirmed certified for UScellular’s LTE and 5G network — a strong fit for rural broadband and fixed wireless deployments in UScellular’s regional coverage footprint across the Midwest and Southeast.

Enhanced with ISPTek’s Cellular SIM Card Data Plans:

• Public Static IP Addresses: Essential for the FW2010e-1’s use case — remote access, port forwarding, VPN termination, and enterprise network integration all require a static, routable IP at each deployed unit.
• Data Pooling Across Devices: Deploy multiple FW2010e-1 units across a building campus, service territory, or client portfolio and pool data across all SIMs under a single ISPTek account — one bill, one management interface.
• Over 12 Custom Plans: Choose from flexible data allowances scaled to outdoor CPE deployments — from lean monitoring and management connections to high-throughput primary internet service for residential and commercial FWA subscribers.
• No Activation or Cancellation Fees: Add and remove units from your deployment without per-device activation fees or long-term contract penalties — scale up for new builds, scale back during off-season without financial friction.
• Zero Touch Advanced Security: Network-level security and access controls applied at the SIM layer — no extra hardware, no additional software licenses, and no configuration overhead per site.

Who Benefits?

• WISPs & Fixed Wireless ISPs: Deploy the FW2010e-1 as CPE at subscriber premises — IP67 protection handles outdoor exposure, dual SIM enables carrier flexibility, and ISPTek’s data pooling lets you manage hundreds of subscriber SIMs from a single billing account without per-site activation overhead.
• MSPs (Managed Service Providers): Install at client sites where no wired broadband is available or where 5G FWA outperforms local cable and DSL options — manage all client SIMs, data usage, and static IPs from one ISPTek account across your entire portfolio.
• Enterprise IT & Campus Network Teams: Extend gigabit 5G connectivity to outbuildings, parking structures, remote facilities, outdoor workspaces, and satellite campuses with a clean single-cable PoE installation — no permits, no trenching, no ISP scheduling.
• Telecom & Carrier Contractors: The FW2010e-1’s Verizon and UScellular certifications make it a pre-approved CPE option for carrier-grade FWA rollouts — ISPTek SIM plans activate quickly at scale and provide the static IPs and pooled data management that field deployments require.
• Rural & Agricultural Operations: Bring high-speed 5G and LTE connectivity to farms, grain facilities, remote worksites, and rural offices where wired infrastructure is unavailable or prohibitively expensive — the IP67 enclosure handles dust, rain, and extreme temperatures without intervention.
• Construction Sites & Temporary Infrastructure: Mount externally at job sites, temporary command posts, or pop-up facilities for full-speed 5G connectivity without wiring or ISP installation wait times — relocate and redeploy between projects with minimal effort.
• AV Integrators & Systems Integrators: Standardize on the FW2010e-1 for exterior 5G CPE across client deployments and consolidate all SIM billing through ISPTek’s partner-friendly data plan platform — one vendor relationship for every site in your portfolio.

The Inseego Wavemaker FW2010e-1 delivers enterprise-grade outdoor 5G connectivity at any location where traditional wired internet falls short or is impractical to deploy. From rural fixed wireless broadband to urban enterprise campus extensions and WISP subscriber premises, it brings IP67-rated sub-6 and mmWave 5G performance across Verizon and UScellular networks with a single-cable PoE installation. Activate it with ISPTek’s cellular SIM card data plans — static IPs, pooled data, no activation fees — and every site in your deployment is fully managed and online from day one.

View available data plans and activate your Inseego Wavemaker FW2010e-1 today!