GC31-HW

Product Description

Check out our data plans here!

The Verkada GC31-HW is an indoor LTE Cat 12 cellular gateway certified on Verizon, AT&T, T-Mobile, and FirstNet, purpose-built to extend Verkada security camera deployments into any location with power and cell signal — whether it’s a parking lot, remote building, construction site, or any hard-to-wire space where running ethernet to an ISP connection is impractical or impossible. Two built-in PoE++ ports deliver up to 60W of total power directly to connected cameras, eliminating the need for a separate PoE switch at the deployment point, while dual Nano-SIM slots with automatic failover keep the cellular uplink live regardless of carrier network events. Cloud-managed through Verkada Command, the GC31-HW requires no on-site configuration and begins connecting cameras automatically upon power-up. Backed by a 10-year hardware warranty, it pairs with ISPTek SIM card data plans on Verizon, AT&T, or T-Mobile for certified 4G LTE connectivity to any Verkada camera installation.

What It Does & Key Features:

• Deploy Cameras Anywhere — No Wired ISP Required: The GC31-HW replaces the need for a wired internet connection at each camera location, enabling Verkada camera deployments in parking structures, construction sites, streetlight poles, portable trailers, remote outbuildings, and any location where running ethernet to an ISP is infeasible. Power the GC31-HW, insert a SIM, and cameras are live on the Verkada Command platform.
• Dual PoE++ Built-In — Power Up to Two Cameras Directly: Two PoE++ capable GigE ports deliver up to 60W total, allowing the GC31-HW to directly power up to two Verkada cameras without a separate PoE switch or injector — reducing installation hardware, simplifying wiring, and keeping the entire deployment in a single compact unit at the mounting point.
• Perpetual PoE — Cameras Stay Powered During Gateway Reboots: Unlike standard PoE implementations, the GC31-HW’s perpetual PoE outputs keep connected cameras continuously powered even when the gateway itself reboots or updates firmware — eliminating the camera downtime that occurs during maintenance windows on conventional cellular gateway installations.
• LTE Cat 12 — Up to 600 Mbps for High-Resolution Camera Feeds: Cat 12’s three-carrier aggregation delivers peak downlink throughput up to 600 Mbps and uplink up to 150 Mbps, providing the upstream bandwidth required to stream high-resolution video from multiple Verkada cameras continuously to Verkada Command’s cloud platform without buffering, dropped frames, or degraded image quality.
• Dual Nano-SIM with Automatic Failover — Continuous Camera Uplink: Two Nano-SIM slots with automatic carrier failover maintain the cellular uplink even if one SIM or network path becomes unavailable — critical for security deployments where a camera going offline means a gap in surveillance coverage. Supports Verkada’s own data plan or any third-party SIM, including ISPTek plans on Verizon, AT&T, or T-Mobile.
• Plug-and-Play Cloud Management via Verkada Command: The GC31-HW auto-connects to Verkada Command upon first power-up — no manual configuration, no on-site IT access required. Security integrators and facilities teams manage gateway status, connectivity diagnostics, and camera assignments remotely through the same cloud platform used to manage the rest of the Verkada deployment.
• FirstNet Certified — Public Safety Network Support: FirstNet certification enables the GC31-HW to operate on AT&T’s FirstNet network — the dedicated broadband network built for first responders and public safety agencies. Ideal for law enforcement, emergency services, and government security deployments requiring priority cellular access on a network reserved for critical communications.
• 10-Year Hardware Warranty — Long-Term Deployment Confidence: The GC31-HW carries a 10-year warranty — a commitment that aligns with the long-term nature of physical security infrastructure deployments where hardware is installed and expected to operate reliably for the life of a building system or campus security program.

Certified on Verizon, AT&T & T-Mobile:

The GC31-HW carries official certification on Verizon, AT&T, T-Mobile, and FirstNet. ISPTek activates SIM card data plans on all three major networks — insert your ISPTek SIM and the gateway is live the same day on whichever carrier provides the strongest signal at your camera deployment site.

• Verizon Certified — Band 13 Low-Band & Mid-Band Coverage: Certified on Verizon’s network with Band 13 (700 MHz) for extended-range low-band coverage in rural areas and large facilities, alongside Bands 2, 4, and 66 for carrier aggregation throughput in metro and suburban markets. Activate on Verizon with an ISPTek SIM card data plan for certified LTE uplink to Verkada Command.
• AT&T Certified — Band 5 Low-Band & FirstNet Priority Access: Certified on AT&T’s network including FirstNet, with Band 5 (850 MHz) low-band reach and Bands 2, 4, and 66 for mid-band data throughput. ISPTek’s AT&T plans support static IP options and data pooling — ideal for multi-site security deployments managing multiple GC31-HW gateways across locations on a single account.
• T-Mobile Certified — Broad Coverage Across Bands 2, 4, 12, and 66: Certified on T-Mobile’s network with Band 12 (700 MHz) for T-Mobile’s primary low-band extended coverage alongside Bands 2, 4, and 66 — delivering reliable LTE uplink for camera deployments in suburban, rural, and mid-density markets where T-Mobile’s extended-range frequencies perform best.
• Global Band Support — International Deployments: Beyond U.S. carrier frequencies, the GC31-HW supports an extensive global LTE band set including Bands 3, 7, 12, 14, 17, and more — enabling Verkada camera deployments in international markets and multi-country enterprise security programs using local carrier SIM cards at each site.

Enhanced with ISPTek’s Cellular SIM Card Data Plans:

• Public Static IP Addresses: Assign a fixed IP to each GC31-HW’s cellular uplink for VPN tunnels to on-premise NVR systems, remote access to individual gateway management interfaces, and integration with security operations center infrastructure — available on Verizon, AT&T, and T-Mobile plans through ISPTek.
• Data Pooling Across Devices: Share one monthly data pool across multiple GC31-HW gateways and SIM-equipped devices — simplifying billing and reducing cost per gateway when managing large-scale security camera deployments across multiple buildings, campuses, or client sites.
• Over 12 Custom Plans: Choose from light monitoring tiers to fully unlimited throughput plans on Verizon, AT&T, or T-Mobile — matched to the upload demand of your camera resolution and stream count at each deployment point, with no throttling or overage surprises.
• No Activation or Cancellation Fees: Start, change, or stop service at any time with zero setup costs or termination penalties — ideal for construction site security deployments and temporary installations where the camera system and its cellular uplink both need to be decommissioned when the project ends.
• Zero Touch Advanced Security: Automated security provisioning protects the cellular WAN link from day one without manual configuration — complementing Verkada Command’s cloud-managed security architecture for end-to-end protection from the camera to the cloud platform.

Who Benefits?

• Physical Security Integrators: The GC31-HW is the deployment solution for every Verkada camera installation where wired ISP connectivity isn’t viable. Insert an ISPTek SIM on Verizon, AT&T, or T-Mobile, mount the gateway, connect cameras via PoE, and the installation is live — no coordination with ISPs, no waiting for circuit installation, no on-site networking expertise required at the camera location.
• Retail Security Deployments: Multi-location retailers need cameras at every site without relying on each store’s ISP connection for camera uplink. The GC31-HW gives each location an independent cellular camera uplink — isolated from the point-of-sale network, managed centrally through Verkada Command, and activated on ISPTek’s pooled data plan across all locations.
• Construction Site Security: Construction sites are high-theft environments with no fixed internet infrastructure. The GC31-HW provides a complete, power-only camera deployment solution — mount it on a temporary power feed, connect cameras via PoE, and the site has live video surveillance on Verkada Command for the duration of the project, decommissioned when the build is complete.
• Parking Structures & Outdoor Areas: Parking lots, garages, and campus exterior areas present challenging wiring environments. The GC31-HW eliminates the need to run data cabling to every camera location — enabling camera coverage in concrete structures, open lots, and distributed exterior points with power-only installations and cellular uplink via ISPTek’s carrier plans.
• Remote & Hard-to-Wire Buildings: Agricultural facilities, warehouses, substations, pump stations, and remote outbuildings often lack structured network cabling. The GC31-HW turns any location with power and cell signal into a live camera monitoring point — without the cost of running fiber or ethernet to a remote structure or paying for a dedicated ISP circuit.
• Public Safety & Government Security: FirstNet certification makes the GC31-HW suitable for law enforcement, emergency management, and government facility security deployments requiring priority cellular access on AT&T’s FirstNet network — providing reliable camera uplink connectivity even during major incidents when commercial LTE networks experience congestion.
• MSPs Managing Multi-Site Security Programs: Security-focused MSPs deploying Verkada across client portfolios can standardize on the GC31-HW as the cellular uplink solution at every camera location that lacks wired internet — managing every gateway through Verkada Command and billing all SIM card data plans through a single ISPTek account with data pooling across the entire client base.

Whether you’re deploying cameras at a construction site, securing a remote parking structure, extending coverage into hard-to-wire areas of a large facility, or building out a multi-site surveillance program across dozens of locations, the Verkada GC31-HW — activated on Verizon, AT&T, or T-Mobile with an ISPTek SIM card data plan — delivers the certified LTE uplink, built-in PoE power, and plug-and-play cloud management that modern security camera deployments demand.

View available data plans and activate your Verkada GC31-HW today!